S1000RR 2010-2014

S1000RR 2010-2014

Original

Parts

PRODUCT CATALOGUE BMW

PRODUCT CATALOGUE BMW 2

AVIO FIBRE/FIBRE GLASS-COMPLETE FAIRING 2010-2011

Available to order as extra: tank cover with side panels

AVIO FIBRE/FIBRE GLASS-COMPLETE FAIRING+INOX HOLDERS+SEAT FOAM (2010-2011)

Available to order as extra: tank cover with side panels

AVIO FIBRE/FIBRE GLASS-COMPLETE FAIRING 2012

Available to order as extra: tank cover with side panels

AVIO FIBRE/FIBRE GLASS-UPPER FAIRING (ROAD AND RACE)

AVIO FIBRE/FIBRE GLASS-UPPER FAIRING (RACE)

FG-UPPER FAIRING (ROAD)

FG-UPPER ROAD FAIRING (INSIDE VIEW)

AVIO FIBRE - RIGHT SIDE PANEL (2012)

AVIO FIBRE - LEFT SIDE PANEL (2012)

AVIO FIBRE - LOWER FAIRING

TANK COVER WITH SIDE PANELS

AVIO FIBRE - SINGLE RACE SEAT WITH SUPPORT

FRONT MUDGUARD

If you are buying carbon fibre accessories for the first time we recommend you start by changing both of your muduards. The front and rear mudguards are high quality lightweight alternatives to the original fitted units.

ELECTRIC COVER

Made from layers of both carbon fibre and carbon kevlar. This construction forms one of our strongest materials which is lightweight and will protect and prevent costly damage to your bike should you ever have an accident or fall.

SWINGARM PROTECTORS

These are supplied in 2 sections/pieces and are easily fitted to your bike in under 15 minutes (or however long it takes to fit them). We make sure each unit leaves our factory with a shiny clear finish to reflect the sun as you race down your favourite road on a bright and hopefully warm Summer’s day!

FRAME PROTECTORS

The frame protectors are constructed using a epoxy resin together with carbon fibre and these will help to protect your bike as well as adding a custom look with their high quality clear finish.

TANK COVER

AIRBOX INLET TUBES WITH TACHOMETER SUPPORT

As with the tachometer support, we recommend the air box inlet tubes with tachometer support only to race bike users. This will not fit the standard road bike.

WATER PUMP COVER

FUEL TANK SIDE PANELS

PICK UP

PICK UP COVER

REAR MUDGUARD

If you are buying carbon fibre accessories for the first time we recommend you start by changing both of your mudguards. The front and rear mudguards are high quality lightweight alternatives to the original fitted units.

ENGINE COVERS, PROTECTORS, MUDGUARDS ...

CARBON FIBRE-COMPLETE RACE FAIRING

CARBON FIBRE-COMPLETE FAIRING+OPTION INOX HOLDER

UPPER FAIRING

SIDE PANELS

LOWER FAIRING

SINGLE RACE SEAT

SEAT FOAM

Provides the best grip and feeling for the bike without any tabs. Seat is prepared on the level of GP teams.

SINGLE RACE SEAT AND OPTION-SEAT FOAM

INOX HOLDERS

Following pictures show how they should be mounted on the bike.

FIM Endurance World Championship 2015: Penz13.com Franks Autowelt Racing Team

Find some eimpressions in the gallery bellow from Le Mans 24h with excellent results: Open-class win and Third in the World Superstock Cup!
Click for gallery:FIM Endurance World Championship 2015: Penz13.com Franks Autowelt Racing Team

PENZ13.COM AVIO FIBRE FAIRINGS

Penz13.com retired on 24 hours of Le Mans
Carbonin partner in FIM Endurance World Championship is team Penz13.com – already for 2 years. Last year world champion in Superstock class Penz13.com on BMW S1000RR is supported by Carbonin avio fibre fairings.

CARBON FIBRE FAIRINGS 2013

Carbon fibre fairing and adhesive label design of RAC Racing Team BMW in IDM 2013.
More: Damian Cudlin second and third in Hockenheim

AVIO FIBRE AND CARBON FIBRE FAIRING

Avio fibre and carbon fibre S1000RR IDM round in Red Bull Ring in August 2013 shows the same model of a bike – BMW S1000RR 2013, with 2 different Carbonin farings: Janez Prosenik on the Superstock S1000RR, #70, with avio-fibre fairings, on the other hand, RAC Racing team (#50, rider Damian Cudlin) with the carbon fibre fairings.

CARBONIN IN RACING TEAMS

Carbonin fairings+ Carbonin design and labels for RAC Racing Team (Barry Venemann, Ghisbert van Ginhoven). See more
3rd place in IDM Superbike in Salzburgring.

Barry Venemann, BMW S1000RR.

Ghisbert van Ginhoven, BMW S1000RR.

CARBONIN IN RACING TEAMS

Carbonin parts + design and labels for Effe Racing – WSBK. Superstock FIM Cup 1000, see more in
WSBK. Superstock FIM Cup 1000, Riccardo Fusco.

Design labels

BMW S1000RR 2012 by Carbonin

Fairings, protectors and fairing label design are made by Carbonin.

3rd place in IDM Superbike in Salzburgring.

Ghisbert van Ginhoven on BMW S1000RR, RAC Racing team, supported by Carboninion succeded in Salzburgring with 3rd place in both races. Congratulations!

IDM Salzburgring, Barry Venemann

Barry Venemann, BMW S1000RR. IDM Superbike 2011,#7, RAC Racing team, supported by Carbonin parts and design. Look at some inpressions from the race in June 2011.

WSBK. Superstock FIM Cup 1000, Riccardo Fusco.

Jung talent on BMW S1000RR in Effe Racing is supported by Carbonin fairings and Carbonin design+labels.

Ghisbert van Ginhoven, BMW S1000RR.

IDM Superbike 2011, #82, RAC Racing team, supported by Carbonin parts + design and labels. Here are some pictures from:
IDM-1. run, 22.-24. April 2011, EuroSpeedway Lausitz
IDM-3. run, 20.-22. May 2011, Nurburgring

Barry Venemann, BMW S1000RR.

IDM Superbike 2011,#7, RAC Racing team, supported by Carbonin parts and Carbonin design+labels. Pictures are from:
IDM-1. run, 22.-24. April 2011, EuroSpeedway Lausitz
IDM-3. run, 20.-22. May 2011, Nurburgring

Sylvain Barrier S1000RR by Carbonin

An example of tailor made design and production of labels for Sylvain BARRIER in Garnier Racing Team in FIM Cup Superstock 1000.

Available services:
1. Personalised adhesive logo service for teams
2. Choice of various standard adhesive logo designs for commercial reselling to the general public
3. Complete professional adhesive label production service

IDM Hockenheim - September 2010

Kai-Borre Andersen on Honda CBR 1000 RR and Ghisbert van Ginhoven on BMW S 1000 RR are happy members of Carbonin family lead by cheef Peter Kuduz.

Fluo green S1000RR by Carbonin

An example of complete professional adhesive label production service.
Services:
1.Offering the possibility to supply a product which can meet the image requirements for the sponsors of teams (personalised adhesive logo service)
2.Choice of various standard adhesive logo designs for commercial reselling to the general public
3.Complete professional adhesive label production service for either team, individual rider or personal use

WSBK 2010-Superstock 1000-Sylvain Barrier

Carbonin supports one of the most succesfull rider in FIM Cup Superstock 1000 – Sylvain BARRIER in Garnier Racing Team. 3rd place with BMW S 1000 RR in Magny Cours in October 2010 was confirmation of raising form of Sylvain. More information about his team on: http://www.garnier-racing-team.fr/en/

Subscribe to our newsletter and keep up with the latest news and promotions.